Description

3D Deck & Dock Defense is an acrylic polymer coating that is environmentally friendly, low-VOC, and non-toxic. 3D acrylic coating resurfaces and revives old decks, docks, porches, and concrete surfaces.

Benefits

• Safe—locks down splinters and prevents slipping on wood
• Durable—creates a durable, easy to maintain surface that lasts several years and prevents UV rays from penetrating the surface
• Decorative—unlimited color choices to coordinate with any decor
• Economical—a fraction of the cost of replacing old boards on decks, docks, and porches

Preparation

1. Surface must be dry, clean and free of debris before coating is applied. We recommend 18% or less in moisture content.
2. If rusted fasteners are present, we recommend our whiteout product to neutralize the rust prior to treatment and it must be dry, prior to priming.
3. Apply the primer with rollers or sprayers straight from the bucket. Let primer dry.

Mixing Instruction

1. With a clean 5 gallon bucket empty one gallon of deck stain into bucket. Add 1 gallon of top coat to stain. Mix well until a consistent color is achieved ( 30 seconds ).
2. While mixing add the aggregate into the stain and top coat. Mix thoroughly until a smooth, creamy coating is achieved ( 1 to 2 minutes ). You are now ready to use the product.

Installation

1. After taping off cut in areas, using brushes, cut in along areas with one heavy coat and feathering leading edge.
2. Using paint roller, apply first heavy coat against the grain trying to fill in all cracks and checks. Do not continue to roll back and forth over coat that has just been applied.
3. After first coat is dry, mix kit same as above and apply second coat rolling with the grain of the wood. Allow 24 hours after 2nd application before area to be used.
4. Seal unused material in container and store in cool dry area.

Packaging Storage + Shelf Life

Recommend storing in sealed containers at <80° F for no longer than 8 months.